Best Method to get rid of HP Error Code 601
Hewlett Packard is one of the most popular names in the personal computing industry. Because of the quality of their products and services, they have millions and millions of customers around the globe. Although it is best, it can cause trouble sometimes. The HP Error Code 601 is one of the most reported error code which arises.
You can troubleshoot the issue yourself easily with the information from this blog.
Issues behind the HP Error Code 601
The HP error code 601 is an error which can hold up the suitable functioning of your HP laptop. This shows up in the form of an error message and can be very annoying at times. What you require to know first, is that this is an issue connected to the battery. There are two batteries in a laptop; one is the basic battery, the removable one. And the other is the CMOS battery that you can find inside the laptop. The hp battery alert error code 601 is connected to the primary battery. This particularly denotes that the battery storage capacity is lower than normal. To be specific, when the current storage capacity is about a quarter of what it must be, this error is likely to arise.
You may also read: Linksys Error Code 2117
How to troubleshoot HP Error Code 601
This section comprises the solutions that you can carry out to resolve this issue. But at the same time, be very careful while doing this to avoid adverse effects on your HP laptop.
Start Your Laptop without Battery
First turn off your computer, and then unplug the power supply. Once you’ve done that, go forth and remove the battery. Press and thus hold down the battery for nearly 20 seconds. Connect the power cable to the charging port after that and power it up. Ultimately, start your laptop again. The error might go away till now. But if it still persists, there are other ways also.
Perform a Battery Test
Within the System diagnostics set of functionalities in an HP laptop, there is a feature for examining the battery health. This might help to resolve the issue. What you got to do is initially turn your PC off. Subsequently, boot it up and press the Esc key to get to the Startup menu. Once there, click the f2 key and then open the ‘Battery Test’ option. From there on, you’ll find detailed on-screen commands. Follow them to perform the procedure of Battery Test suitably.
Re-attach Your Battery
This is the easiest solution to resolve this issue. You can go for this before any of the others. Thus, simply shut down your computer and disconnect it from the power supply. Take out the battery and hold down on the power button for nearly 25 seconds. Re-connect the battery and switch it on, and check if the error message is gone.
Get a New Battery
If none of the mentioned above methods provide you relief then might be your battery is damaged. Thus for that, you would have to get yourself a new one.
If HP Error Code 601 still persists, then simply have words with professionals at our toll-free for quick resolution.
Q) How to reset HP laptop battery?
A) With the battery and power cord unplugged, tap and hold the Power button for nearly 15 seconds to drain any residual electrical charge from the capacitors. Insert the battery and plug the AC adaptor back into the laptop, but don’t connect any of the peripheral devices. Click the Power button to turn on the system.
Q) Why my HP laptop is plugged in but still not charging?
A) If the laptop battery is not charging or the laptop does not denote that the battery is charging, the most possible reason is that the battery itself is operating rightly, but its power management software may have become corrupt.